Jumpers
Our flagship bi-wire jumpers. Clear Bi-wire Jumpers use Clear speaker conductor, arranged like a very short Clear speaker cable.
As with Clear speaker cable, Clear Bi-wire jumpers use multi-stranded concentric conductors. The outside of one concentric conductor is tied to the inside of the other for each lead (positive & negative). This is why the positive and negative leads are bundled together and can not be separated.
As Clear Speaker Cable can't be bi-wired, these are ideal for using Clear with bi-wire speakers. However they are excellent bi-wire jumpers for any situation, regardless of the speaker cable you're using, Cardas or otherwise. Sold in pairs, as pictured above.
Clear Jumpers measure 10” (25.4cm).
Standard Termination: Cardas spades or bananas forged using 10,000psi in Bandon Oregon.
Bi-wire jumpers made with our 9.5 AWG chassis wire.
6”/15.24cm long
Conductors: Grade 1, 99.9999% pure oxygen free copper with SPN clear coat (Litz), gauge sizes scaled to Golden Ratio proportions. Crossfield layer geometry, insulated in a PTFE jacket.
Sold in sets of four (two red, two black), as pictured above.
Standard Terminations: Cardas CGMS spades or CABD bananas. Hand soldered in Bandon Oregon. Sold in sets of 4.
Bi-wire jumpers made with our 11.5 AWG chassis wire.
6”/15.24cm long
Conductors: Grade 1, 99.9999% pure oxygen free copper with SPN clear coat (Litz), gauge sizes scaled to Golden Ratio proportions. Crossfield layer geometry, insulated in a PTFE jacket.
Sold in sets of four (two red, two black), as pictured above.
Standard Terminations: Cardas CGMS spades or CABD bananas. Hand soldered in Bandon Oregon. Sold in sets of 4.
Our most economical bi-wire jumpers. Stamped from solid Grade 1, 99.9999% pure oxygen free copper. Designed to fit 1.5” (38.1mm) binding post spacing. Dual spade size can fit standard 6.3mm or larger 9mm binding posts.
Can be carefully bent to fit application if needed.
Available in bare copper (CJP C) or silver/rhodium plate (CJP R). Sold in sets of 4.